|
|
New Aluminium Alloys in Aircraft Structures
Przeczek, Jan ; Šplíchal, Jan (referee) ; Klement, Josef (advisor)
This bachelor work deals with newly developed wrought aluminium alloys, designed for application in aerospace industry. The task of that work is to compare recent aircraft aluminium alloys with conventional alloys and indicate direction of progress in this field. The comparison is particularly focused on improvement of mechanical and/or technological properties of these alloys.
|
|
|
CNC pocket milling of aeronautical alloys
Wiecková, Kateřina ; Sedlák, Josef (referee) ; Ohnišťová, Petra (advisor)
The aim of the work is to generate and verify pocket milling technology in aviation alloy 7475-T7351 with respect to machine time, surface and machining productivity. First part of the work is theoretical analysis of cycles of milling of simple and complex pockets. Next part of the work is focused on the desing and optimization of strategy of milling of simple and complex pockets in CAM programs and its experimental verification.
|
|
|
Influence of degassing parameters on quality of Al castings
Jeřábek, Petr ; Horenský, Jiří (referee) ; Vašťák, Patrik (advisor)
This master’s thesis is focused on optimalization of degassing parameters in the foundry plant and effect of these parameters on mechanical properties of Al-Si alloys. In practical part is used factorial experiment to research effect of degassing parameters on mechanical properties and dichte index. After optimalization the new process is validated by comparing with the previous one. This experiment was taken on AlSi7Mg0,6 alloy in foundry plant MESIT foundry, a.s.
|
|
|
Inspection of welded joints of loading ramps
Ertl, Roman ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
This master's thesis is focused on problem of welding of loading ramps and inspection of their welded joints. The aim of this thesis is to inspect the welds of loading ramps with regarding to the appearance of defects. The literature review of the research issues of the MIG welding technology and welding of aluminium and its alloys is described in this thesis. There is also described destructive and non-destructive inspection of welds that can be applied to inspection of loading ramps. Theoretical description is followed by an experimental part of the thesis. Experimental part is focused on the three destructive tests (the tensile, the macroscopic and the hardness test) of samples of loading ramps, which are made of EN AW-6005A T6.
|
|
|
Corrosion resistance of aluminum alloys
Kouba, Jan ; Pacal,, Bohumil (referee) ; Zmrzlý, Martin (advisor)
This diploma thesis deals with cerium-based conversion coatings for aluminium alloys. At first the mechanism of protection of metals by inhibitory substances is described in the theoretical section. The next chapter is devoted to application of lanthanide salts as cathodic corrosion inhibitors. Then the characterization of alloy AA 2024 follows. The main part is dedicated to the growth mechanism of the cerium-based mixed conversion coating on the alloy AA 2024. Finally, the factors affecting the character and the quality of obtained coatings are commented. In the experimental part an influence of the thermal activation together with the activation by a hydrogen peroxide was observed. The created film was characterized using SEM and EDS. The level of corrosion protection was evaluated by the polarization resistance measurement. erized using SEM and EDS. The level of corrosion protection was evaluated by the polarization resistance measurement.
|
|
|
Surface pre-treatment of structural aluminum alloys for bonded joints
Pikner, Jan ; Doskočil, Leoš (referee) ; Wasserbauer, Jaromír (advisor)
This thesis deals with pre-treatment of surface of aluminium alloys. The theoretical part focuses on the properties of aluminium and its alloys, on methods of surface treatment and the possibilities of quality assessment of pre-treated surface. The experimental part deals with finding of a proper method of pre-treatment. The quality of surface pre-treatment is assessed by observation by SEM with EDS and by single lap shear tests of adhesive joints. According to evaluated results, the optimalised methods are qualitatively and financially compared with the commercial method.
|
|
|
Optimization of aluminium casting process using numerical simulation
Kolařík, Martin ; Lána, Ivo (referee) ; Krutiš, Vladimír (advisor)
The master’s thesis deals with the analysis of casting technology of the selected aluminium casting. It is a casting of a part of CNC milling machine and it is cast by gravity casting into a permanent mold. The defects which are the cause of a high percentage of nonconforming production were analyzed. Furthermore, the master’s thesis includes a complete analysis of filling and solidification of this casting in the ProCast simulation program. Numerical simulation results are verified and improved. Then the causes of problematic casting defects are proven on several calculated variants. Measures are proposed to minimize the tendency to produce castings with defects leading to nonconforming production.
|
|
|
Machining of the Formula hub on CNC Machining Centre
Jelínek, Petr ; Dvořáček, Jan (referee) ; Sedlák, Josef (advisor)
The master thesis deals with design and manufacturing of rear right formula hub on CNC machining centre by using modern CAD/CAM technologies. The theoretical part is focused on description and characterization of milling technology and machinability of aluminium alloys. The practical part is focused on the designing formula hub in CAD software Pro/Engineer, proposing machining strategies by using CAM software PowerMILL and manufacturing on CNC machine. There is technical economic evaluation of the machined part at the end of the thesis.
|
|
| |
|
|
The Material Selection for Bicycle Frames
Šály, Peter ; Petrenec, Martin (referee) ; Němec, Karel (advisor)
Bachelor's thesis summarises basic information about materials that are used for production of bicykle's frames. It concerns not only with common materials that are the most used nowadays, thus aluminium alloys and composite materials – carbon in the concrete, but it also pointed on the other, alternative materials. It also explains specific terms that relate to concrete materials or to their technological treating. Each material has listed characteristic which is objective thus measurable and it results from physical-chemical's properties and treating possibilities of concrete materials. It conveys assumption of frame behaviour made from this material. Subjective characteristic is also listed and it results from practice – from the feelings by real ride. Comparison of these two approaches resulted in conclusion which may help in choosing material for bicykle's frame which we have specific requirements on. Next thesis concerns with usage of concrete materials by various producers whether world producers or national ones, with orientation on brands which are interesting because of their treating of unusual materials or they are interesting because of their specific treating of common materials. There is a brief review of most used materials for concrete types of bicycle's frames at the end of the thesis.
|
guest ::
